Author: mybeadsaustralia

A simple but cute bracelet with the classic combination of turquoise, coral and silver. Strung on tigertail.

A simple bracelet strung on tigertail. We have substituted the metal round beads.

A cute little bracelet made using some of our pretty pewter charms.

Made using aluminium wire, 1.5mm thick and 0.6mm thick.

This is a technique we teach in our beading classes!

A cool combo of turquoise, agate and pearl! Step 1. First, make the coiled bead section. For this project, we’ll be using a coiling gizmo. Take about two meters of 24 gauge wire and using the smallest coil bar, make a coil about 12cm long (the whole length of the coil bar). Slide this coil…

Step 1. First, make the coiled bead sections. For this project, we’ll be using a coiling gizmo. Take about two meters of 24 gauge wire and using the smallest coil bar, make a coil about 12cm long (the whole length of the coil bar). Slide this coil onto a piece of 18ga wire 2cm longer…

Step 1. Take two pieces of 18ga wire approx. 20cm long, and form swirls at both ends of each wire (start the swirls off with round nose pliers, then continue them with flat nose pliers). Step 2. Connect the two wires togetehr at one end near the swirls by wrapping the 24ga wire around 5…