Autumn Foil Cluster Bracelet

Pretty necklace using sparkly dichroic glass and a ribbon necklace.

Why We Love This Tutorial: We were inspired by these gorgeous Selenite with polished Tiger’s Eye pendants, so we made a simple necklace & earrings set that lets the pendant shine. We also just had a heap of new connectors arrive in, so we couldn’t help ourselves with using the very sweet vine connectors in…

We’ve used some of the stunning new Crackled Agate ovals teamed with some sparkly crystal beads to create this extra long necklace! Product Information: This necklace was made 18/3/2019. You may need to find similar beads if items used are no longer in stock, as much of our stock is limited edition.

Why We Love This Tutorial: These wire wrapped earrings look far fancier than the amount of effort required to make them – winning! We’ve used some of our gorgeous new nugget freshwater pearls mixed with some lovely natural tiny 3mm Gemstone beads in Faceted Labradorite. These will take no more than about 30 minutes for…

This design is similar to last week, however this time we have not used large hole beads – instead we are using the new Faceted agate rondelles. Make your jump rings out of 18ga Artistic Wire, to be about 14mm in diametre. We have made smaller rings for the ends at about 8mm in diametre.

Step 1. Take two pieces of 18ga wire approx. 20cm long, and form swirls at both ends of each wire (start the swirls off with round nose pliers, then continue them with flat nose pliers). Step 2. Connect the two wires togetehr at one end near the swirls by wrapping the 24ga wire around 5…