A pretty knotted necklace using 14mm marble glass beads. I’ve used 1mm cotton cord, knotting in between each bead. I used about a metre of cord to make this 60cm long necklace.
Similar Posts
Fire Agate and Pearl Cuff
Step 1. Take two pieces of 18ga wire approx. 20cm long, and form swirls at both ends of each wire (start the swirls off with round nose pliers, then continue them with flat nose pliers). Step 2. Connect the two wires togetehr at one end near the swirls by wrapping the 24ga wire around 5…
Faceted Agate Necklace
This design is similar to last week, however this time we have not used large hole beads – instead we are using the new Faceted agate rondelles. Make your jump rings out of 18ga Artistic Wire, to be about 14mm in diametre. We have made smaller rings for the ends at about 8mm in diametre.
Lapis Lazuli & Tiger Eye Tassel Necklace Tutorial
Why We Love This Tutorial: This tutorial is mostly about making a simple tassel from nylon cord. It is a very basic tassel that takes next to no time or skill to make. You can make them as large or small as you like – this one is relatively small at about 60mm, and is…
Tiny Gemstone Bead Bracelets
Why We Love This Tutorial: These are just some super simple bracelets strung on tigertail – the special part? They are using some of our super-sparkly, super-sweet new tiny faceted gemstone beads! There are no real rules with these! We have kept it simple and used occasional gold spacers (4mm wheels and 3mm rounds), and…
Mookaite Macrame Pendant Necklace Tutorial
Why We Love This Tutorial: One of the limitations of macrame is finding beads with holes big enough to fit one or more strands of cord through – but this tutorial solves that problem! It’s just a basic spiral knot (the same as a square knot, except you don’t change directions… in other words, a…